Godiag newly released a 2024 dedicated device for BMW locksmiths, maintenance engineers and CAS2 / CAS3, CAS3+ CAS3++ programming engineers. It’s Godiag CAS2 CAS3 SER Semi Smart Test Platform.
What can GODIAG CAS2 CAS3 Test Platform do?
- Detect CAS and key synchronization
- Solder-free matching CAS2/CAS3 series smart key
- CAS data reading, writing and programming
- All keys lost /adding keys matching
(Compatible with Xhorse Key Tool Plus Pad/ Xhorse VVDI2/ BMW VVDI BIM Tool/ Autel im608/ CGDI BMW/ Lonsdor K518, OBDSTAR tool, etc.)
- CAS key data backup
- CAS module function judgment
How to detect CAS module and magnetic semi-intelligent smart key is synchronized?
Step 1: Connect the CAS2/CAS3, CAS3+ CAS3++ modules according to the connection diagram.
Step 2: Put the key into the key sensing area.
Step 3: Connect the power supply and the corresponding power indicator light will light up. The start/stop button light is on. The coil sensor light will flash. It indicates that the module can send out the key sensing signal normally.
If the key and the module are synchronized, the light will flash regularly or stay on.
If the key and module are out of sync, the flashing will be irregular and will stop after one minute.]
Step 4: Press the start switch.
If the key is synchronized with the CAS module, the IMMO synchronization detection indicator light will light up and the internal buzzer of the machine will sound.
If the key is not synchronized with the CAS module, the IMMO synchronization detection indicator light will not light up and the internal buzzer of the machine will not sound.
Step 5: Press the analog start and stop button, the IMMO synchronization detection indicator light will go out after 3 seconds. Press the analog start/stop button again and the IMMO synchronization detection indicator light will light up.
How to perform BMW CAS module and semi-intelligent/smart key programming and matching with Xhorse VVDI2 and Godiag CAS2 Test Platform?
Step 1: Connect the CAS2/CAS3, CAS3+ CAS3++ module and the VVDI2 Programmer according to the connection diagram.
Step 2: Select Key Learn>> CAS Key Learn>> Connect
Step 3: After identifying the CAS info successfully, select Get Key Info>> Save Key Info to save the original key info.
Step 4: Select an unused key position, and select “Prepare dealer key with programmer” menu, Use the VVDI2 key programmer to generate the key
If the key is placed in the GODIAG CAS2 CAS3 SER Semi Smart Test Platform key sensing area, the dealer key will not be generated.
Step 5: After programming the dealer key, put the key into the Godiag CAS2 CAS3 Test Platform induction port for testing.
For test steps, please refer to “Synchronous Detection of Module and Key”.
If the IMMO light cannot light up, enter the VVDI2 menu, and perform the following steps:
Key Learn>> CAS/EWS Information>> Connect>> Synch DME-CAS or Synch CAS-ELV
When performing synchronization, the key must be placed in the key sensing area of the Xhorse VVDI2 programmer.
Learn more info, check https://www.godiagshop.com/wholesale/godiag-cas2-cas3-test-platform.html