Both GODIAG GD101 J2534 Passthru Cable and Xhorse MVCI Pro J2534 can replace multiple sets of expensive original equipment, and can complete original factory-level vehicle diagnosis and programming.
What is the difference between them? Which one is better?
Similarities:
Both are compatible with Toyota techstream, Honda HDS, VAG ODIS, Ford IDS, Mazda IDS, and Subaru SSM4 software.
Differences:
They come from different brand manufacturers.
GODIAG J2534 Cable also supports JLR SDD, Renault Clip, Nissan Consult iii+/R2R, Volvo VIDA, GM GDS2, Xentry passthru, PCM-flash, ELM327 Mode (scanmaster, Forscan, etc) while MVCI PRO J2534 does not support.
GODIAG J2534 is cheaper than MVCI Pro.
MVCI Pro is powered by license, and does better performance on VAG ODIS and Subaru SSM4.
Check the comparison table below.
| Item | GODIAG GD101 J2534 | Xhorse MVCI Pro |
| Image |  |  |
| Brand | GODIAG | Xhorse |
| Toyota techstream software | Yes | Yes |
| Honda HDS software | Yes | Yes |
| VAG ODIS software | Yes | Yes |
| Ford IDS software | Yes | Yes |
| Mazda IDS software | Yes | Yes |
| Subaru SSM4 software | Yes | Yes |
| JLR SDD software | Yes | - |
| Renault Clip software | Yes | - |
| Nissan Consult iii+/R2R software | Yes | - |
| Volvo VIDA software | Yes | - |
| GM GDS2 software | Yes | - |
| Xentry passthru | Yes | - |
| PCM-flash | Yes | - |
| ELM327 Mode (scanmaster, Forscan, etc) | Yes | - |
Compatible with OEM software for online programming | No | No |
| Operating system | Windows 8/10/11, 32/64bit (Better Not Install Driver on Win7!) | Win7/Win8/Win9/Win10 |
| Driver | GODIAG J2534 driver | Xhorse MVCI driver |
| Update | Software update by link | Software update by link |
| Firmware update online | Firmware update online | |
| Price | US$23.00 | US$95.00 |