Confirmed! OBDSTAR DC706 with ECM V30.54 read and write INT Flash and INT EEPROM to Volkswagen Continental SIMOS18.10 TC1791 ECM by boot perfectly.
Requirements:
Update the ECM software to V30.54 or above
Connect DC706 with an available WiFi
Accessories required:
Main cable
OBDSTAR P004 ECU Clone Jumper
OBDSTAR MP001 Programmer
OBDSTAR C4-01 and W005
Menu function path:
Select ECU Flasher>> All>> ECM>> ECMV30.54>> imos18.10>> VOLKSWAGEN CONTINENTAL SIMOS18.10 TC1791
Boot connection diagram:
PINOUT wiring diagram:
Follow the diagrams to connect DC706 and ECU correctly using the related accessories, and supply power to DC706 as well
Operation:
After connection, click “Start”, select “BOOT” and “MP001” options
Make sure MP001 Programmer with DC706 ECU tool connection is normal
Connect ECU successfully
Read and save the original INT flash and INT eeprom (TC1791) data- OK
Connect OBDSTAR DC706 ECU Tool to a new SIMOS18.10 ECM
Read and save the new INT flash and INT eeprom (TC1791) data- OK
Write the corresponding INT flash and INT eeprom data of original ECM into the new one- OK
Click “Disconnect”
Done!