Godiag will release a professional cable to work with Godiag GT107+ DSG Plus Gearbox Data Adapter and Launch scan tool, DFBflash, foxflash, kess v2, and kess v3… to clone, diagnose, read and write data for VAG series gearbox ECUs. It has already been tested and confirmed 100% working by godiagshop.com engineer.
Godiag gearbox clone cable has 7 different cables for different gearbox ECUs.
It can be directly connected to the vehicle's gearbox ECU to clone.
Here takes VAG DQ200 0AM gearbox ECU as an example to show how to use the Godiag clone cable.
How to connect?
Connect DBSCar Connector and Launch X431 V+ via Bluetooth
Plug Launch DBSCar Connector to Godiag GT107+ DSG Plus Adapter
Connect Godiag GT107+ Adapter and gearbox ECU via the Godiag gearbox clone cable
Supply power to Godiag GT107+, and press the 120 ohm CAN resistance switch and Manual power analog ignition switch
How to clone/diagnose/read/write gearbox ECU?
Go to diagnose menu
Select VW>> VW diagnose software>> System selection>> Transmission control unit
Confirm the gearbox ECU info
Read fault code successfully
We will update more test reports in the future.
Stay tuned!
Video Guide: