It has been tested and confirmed that Godiag BMW FEM/BDC Test Platform, Godiag BMW CAS4/CAS4+ Test Platform can work with Lonsdor K518 key programmer to identify key info, program all keys lost and add new key to BMW CAS4/CAS4+, FEM/BDC module on bench.
1.Godiag FEM/BDC Test Platform + Lonsdor K518 Identify FEM Keys
Connect Godiag FEM Test Platform, Lonsdor K518ISE/K518S, and FEM/BDC module correctly, and supply power to Godiag Test Platform.
Select IMMO& Remote>> BMW>> Select from type>> FEM/BDC>> Read key data
Recognize the key info successfully
Select one blank key ID (i.e.key 03) to read
Read data successfully
2. Godiag CAS4/CAS4+ Test Platform + Lonsdor K518 Add CAS4 New Key
Connect Godiag CAS4 Test Platform, Lonsdor K518ISE/K518S key programmer, and CAS4/CAS4+ module correctly, and supply power to Godiag Test Platform.
Select IMMO& Remote>> BMW>> Select from type>> CAS4/CAS4+>> Method 2 (OBD)
Step 1: Read key data
Follow the prompts to do
Recognize the key info successfully
Select one blank key ID to generate key
It shows no need to pre-process the vehicle.
Step 2: Make dealer key
Return to the main menu, tap [Make dealer key]
Just pay attention to the prompt, and continue
Turn on the ignition
Select one blank key ID (i.e. key2) to generate
Tap [IMMO coil generation], and select “Have original key”
Put a working key close to induction coil of Godiag CAS4/CAS4+ Test Platform
Identify the key info successfully
Step 3: Generate key with Autel KM100
Use Autel MaxiIM KM100E to generate the blank key with key frequency 315Hz and then read the key status, the key is not locked.
Put the key generated into the induction coil of Godiag CAS4/CAS4+ Test Platform
Generate the dealer key and lock the key successfully
Press the ignition switch of Godiag CAS4 CAS4+ Programming Test Platform to identify
The key can light up the analog dashboard light, and it means the key is generated successfully.
Finally, use Autel KM100E to identify the key generated, now the key status is locked.
