How to diagnose SID208 ECU by GODIAG GT100+ OBDII Breakout Box and Autel MK808Z-BT diagnostic scanner? Check the step-by-step guide below.
How to connect?
- Remove the MaxiVCI Mini from the back of Autel MaxiCOM MK808Z-BT
- Connect Godiag GT100+ ECU Connector and Autel MK808Z-BT VCI by the Godiag OBD 2-in-1 extension cable
- Connect Godiag GT100+ and SID208 ECU via the Godiag Colored Jumper Cable according to the corresponding wiring diagram
- Connect Godiag Power Supply 12V to GT100+
The indicator lights on the device will turn on automatically.
How to operate on Autel MK808Z BT tablet?
Select Diagnostics>> EOBD>> Accept the disclaimer>> Autoscan>> Gasoline/petrol
It identifies the vehicle protocol successfully.
Then enter function menu
MK808Z BT supports DTC& FFD, I/M readiness, live data, on-board monitor, component test, vehicle information, and vehicle status.
Select the corresponding option to operate separately, all are ok.
Read DTC& FFD
I/M readiness
View live data
Check vehicle generation information
Check vehicle status
Godiag GT100+ not only can tell whether the car/ECU module, and cable communication is good or not, but also can directly display the Voltage and Current data during the operation. Easy and safe to work with diagnostic tool!