Godiag GT107+ DSG Plus can work with VXDIAG VCX SE, SM2 Pro, and JLR Moogoose SDD Pro J2534 Passthru devices to read VAG DQ200 via pcmflash software. All can work offline, no need network connection. Need a PCMTuner USB Smart Dongle to use, which has 67 software modules inside.
Godiag GT107+ DQ200 Pinout
Connection diagram:
- Godiag GT107+ and VCX SE:
Plug the PCMTuner USB Dongle to computer
Connect VCX SE J2534 hardware to computer via USB cable, and connect to GT107+ Adapter directly
Connect GT107+ and DQ200 gearbox via the DB9 DSG gearbox universal conversion jumper
Plug the power supply to GT107+
Press 120 ohm CAN resistance switch
No need to press GT107+ analog ignition switch button now, just press it according to the software prompt during the operation.
- Godiag GT107+ and Moogoose JLR:
Plug the PCMTuner USB Dongle to computer
Connect JLR Moogoose SDD to computer and GT107+ DSG Plus Adapter directly
Connect GT107+ and DQ200 gearbox via the DB9 DSG gearbox universal conversion jumper
Plug the power supply to GT107+
Press 120 ohm CAN resistance switch
No need to press GT107+ analog ignition switch button now, just press it according to the software prompt during the operation.
- Godiag GT107+ and SM2 Pro:
Plug the PCMTuner USB Dongle to computer
Connect SM2 Pro J2534 VCI to computer via USB cable, and connect to GT107+ Adapter via main cable
Connect GT107+ and DQ200 gearbox via the DB9 DSG gearbox universal conversion jumper
Plug the power supply to GT107+
Press 120 ohm CAN resistance switch
Scanmatik supports automatic data reading, no need to press GT107+ ignition switch button.
Operation:
After connection, run pcmflash sofwtare to read VAG DQ200 data.
The interface is different when using different J2534 device
For VXDIAG VCX SE, select J2534: VXDIAG-J2534.
For Monsoose Pro JLR, select J2534: Drew Technologies Inc.- Monsoose Pro JLR
For SM2 Pro, select J2534: Scanmatik- SM2 USB
Then select ECU- [58]: VAG DQ200/MQB Boot (EEPROM)
First, idenfify the gearbox TCU info.
When it asks “Wolud you like to use automatic power control (L-Line)?”
Click “No” if you use VCX SE or Monsoose Pro JLR
Click “Yes” if you use SM2 Pro.
For VCX SE and Monsoose Pro JLR, follow the prompt to press GT107+ switch button. It’s recommended to stay 2 seconds and then press. And then turn ECU power OFF.
GT107+ shows the voltage automatically when using Scanmatik.
Second, read and backup EEPROM data
Just follow the prompt to operate.
All work fine.
Read more:
Godiag GT107+ DSG Plus Gearbox Data Adapter Read VAG DQ200 with Different ECU Programmers:
http://blog.godiagshop.com/how-to-read-vag-dq200-with-godiag-gt107-and-different-ecu-programmers/