2016 BMW F18 LCI 525Li Key Added by Xhorse VVDI2 and Godiag CAS4 Test Platform

How to add new key to 2016 BMW 5 Series F18 LCI 525Li by Xhorse VVDI2 programmer and Godiag CAS4 CAS4+ Test Platform? Check the step-by-step guide.

Operation video:

 

The operation process (word& image):

Connect Godiag CAS4 test platform to BMW CAS module, and connect to Xhorse VVDI2 by GODIAG OBD2 to OBD25 Cable, then connect VVDI2 to the computer via USB cable

xhorse vvdi2 and godiag cas4 test platform add bmw key 1

Run VVDI2 Quick Start

Click BMW >> Key Learn>> CAS Key Learn>> Get key info

Detect out the car info incl. car type, general info, key info and VIN

xhorse vvdi2 and godiag cas4 test platform add bmw key 2

Then Backup Coding

Save the original key info

xhorse vvdi2 and godiag cas4 test platform add bmw key 3

Next Prepare dealer key with programmer

Tick ‘Have a working key. Switch ON ignition with working key and continue’

Click NEXT

xhorse vvdi2 and godiag cas4 test platform add bmw key 4

Insert the working key to the ignition switch then press OK

If you get this error ‘sychronize data not correct, we need verify working key…’ Just input the working key to VVDI2 key programmer coil before continue.

xhorse vvdi2 and godiag cas4 test platform add bmw key 5

xhorse vvdi2 and godiag cas4 test platform add bmw key 6

Record the related CAS4/CAS4+ security key saved at ‘My document/VVDI2/CAS4’

xhorse vvdi2 and godiag cas4 test platform add bmw key 7

Attention:

  1. Prepare dealer key with programmer must have a working key
  2. If you don’t have working key, the new key only support emergency start
  3. If you don’t have working key, you’d better prepare dealer key within ignition switch

Input the original key (support disabled key) to VVDI2 programmer

Then take out the original key and put the new key into programmer

Key written successfully

xhorse vvdi2 and godiag cas4 test platform add bmw key 8

Go to car with the key, not need write back EEPROM

Put the new car key into Godiag CAS4 CAS4+ programming test platform and press the Start button, works fine.

xhorse vvdi2 and godiag cas4 test platform add bmw key 9

www.Godiagshop.com

Post a Comment (0)
Previous Post Next Post